| AD Number | 56-27-03 | Status | Active |
| Effective Date | Not specified | Issue Date | April 11, 1957 |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | --- - _EMPTY_ |
| Citation | This information is not available. | ||
| Manufacturer(s) | Piper Aircraft Inc. |
| Model(s) | PA-23 |
56-27-03 PIPER: Applies to Model PA-23, Serial Numbers 23-1 Through 23-800 Except 23-732, 23-736, 23-739, 23-740, 23-741, 23-769, 23-777, 23-784, 23-787, 23-794, 23-797 and 23-799.
Compliance required by February 1, 1957.
In order to prevent fatigue cracking in the aileron balance weight bracket at a point where the bracket tubes are welded to form a 90 degree angle, it will be necessary to remove both the right and left aileron balance weight brackets and reinforce them with gussets, Piper P/N 17126- 07 in accordance with the instructions and sketch contained in Piper Service Bulletin No. 149 dated December 10, 1956.