| AD Number | 48-05-03 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Bellanca Aircraft Corporation |
| Model(s) | 14-13 14-13-2 |
48-05-03 BELLANCA: Applies to 14-13 and 14-13-2 Serial Numbers 1060 Through 1576.
Compliance required by March 15, 1948.
Install a 3/16-inch bolt with self-locking nut and three washers (installed as spacers) through each of the brackets which retain the trim tab brass trunnions at the tab and elevator. Install the bolt 7/16 of an inch above the trunnion centerline to prevent spreading of the brackets.
(Bellanca Service Bulletin No. 14 covers this same subject.)