Back to AD

AD 66-14-04 ACTIVE

Cam Reduction Drive Gear Assembly
Key Information
AD Number 66-14-04 Status Active
Effective Date July 09, 1966 Issue Date Not specified
Docket Number Unknown Amendment 39-247
Product Type ["Engine"] Product Subtype Not specified
CFR Part --- - Part 39 CFR Section N/A
Citation This information is not available.
Applicability
Manufacturer(s) Pratt & Whitney Division
Model(s) Military R-985 Series Wasp Jr. A Wasp Jr. B-4 Wasp Jr. B-5 Wasp Jr. SB Wasp Jr. SB-2 Wasp Jr. SB-3 Wasp Jr. T1B Wasp Jr. T1B2 Wasp Jr. T1B3 Wasp Jr. T3A Wasp Jr. TB Wasp Jr. TB-2
Regulatory Text

66-14-04 PRATT & WHITNEY: Amdt. 39-247 Part 39 Federal Register June 8, 1966. Applies to Pratt & Whitney Aircraft Wasp Jr. and R-985 Series Engines.
Compliance required at the next engine overhaul after the effective date of this AD unless already accomplished.
To prevent failure of the cam reduction drive gear assembly and resultant loss of engine power, replace cam reduction drive gear assembly, P/N 3965, with cam reduction drive gear, P/N 331098.
(Pratt & Whitney Aircraft Service Bulletin No. 1671, Supplement No. 1, Revision A, revised November 24, 1959, pertains to this subject.)
This supersedes AD 62-11-05.
This directive effective July 9, 1966.