AD 66-14-04

Active

Cam Reduction Drive Gear Assembly

Key Information
66-14-04
Active
July 09, 1966
Not specified
Unknown
39-247
Applicability
["Engine"]
Not specified
Pratt & Whitney Division
Military R-985 Series Wasp Jr. A Wasp Jr. B-4 Wasp Jr. B-5 Wasp Jr. SB Wasp Jr. SB-2 Wasp Jr. SB-3 Wasp Jr. T1B Wasp Jr. T1B2 Wasp Jr. T1B3 Wasp Jr. T3A Wasp Jr. TB Wasp Jr. TB-2
Regulatory Text

66-14-04 PRATT & WHITNEY: Amdt. 39-247 Part 39 Federal Register June 8, 1966. Applies to Pratt & Whitney Aircraft Wasp Jr. and R-985 Series Engines.
Compliance required at the next engine overhaul after the effective date of this AD unless already accomplished.
To prevent failure of the cam reduction drive gear assembly and resultant loss of engine power, replace cam reduction drive gear assembly, P/N 3965, with cam reduction drive gear, P/N 331098.
(Pratt & Whitney Aircraft Service Bulletin No. 1671, Supplement No. 1, Revision A, revised November 24, 1959, pertains to this subject.)
This supersedes AD 62-11-05.
This directive effective July 9, 1966.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents