Back to AD

AD 66-22-02 ACTIVE

Pneumatic Brake System
Key Information
AD Number 66-22-02 Status Active
Effective Date October 07, 1966 Issue Date Not specified
Docket Number Unknown Amendment 39-285
Product Type ["Aircraft"] Product Subtype ["Large Airplane"]
CFR Part --- - Part 39 CFR Section N/A
Citation This information is not available.
Applicability
Manufacturer(s) The Boeing Company
Model(s) 727-100 Series 727-100C Series 727-200 Series 727-200F Series 727 Series 727C Series
Regulatory Text

66-22-02\tBOEING: Amdt. 39-285 Part 39 Federal Register September 7, 1966. Applies to Model 727 Series Airplanes Listed in Boeing Service Bulletin No. 29-22, Dated February 21, 1966.\n \n\tCompliance required within the next 700 hours' time in service after the effective date of this AD, unless already accomplished. \n\n\tTo prevent failure of the pneumatic brake system due to leaks between the control valve and the brake housing, modify the pneumatic brake system line installation in accordance with Boeing Service Bulletin No. 29-22, dated February 21, 1966, or later FAA-approved revision, or an equivalent approved by the Chief, Aircraft Engineering Division, FAA Western Region. \n\n\tThis directive effective October 7, 1966.