AD 66-22-02

Active

Pneumatic Brake System

Key Information
66-22-02
Active
October 07, 1966
Not specified
Unknown
39-285
Applicability
["Aircraft"]
["Large Airplane"]
The Boeing Company
727-100 Series 727-100C Series 727-200 Series 727-200F Series 727 Series 727C Series
Regulatory Text

66-22-02\tBOEING: Amdt. 39-285 Part 39 Federal Register September 7, 1966. Applies to Model 727 Series Airplanes Listed in Boeing Service Bulletin No. 29-22, Dated February 21, 1966.\n \n\tCompliance required within the next 700 hours' time in service after the effective date of this AD, unless already accomplished. \n\n\tTo prevent failure of the pneumatic brake system due to leaks between the control valve and the brake housing, modify the pneumatic brake system line installation in accordance with Boeing Service Bulletin No. 29-22, dated February 21, 1966, or later FAA-approved revision, or an equivalent approved by the Chief, Aircraft Engineering Division, FAA Western Region. \n\n\tThis directive effective October 7, 1966.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents