| AD Number | 47-32-07 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Rotorcraft"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Scotts-Bell 47 Inc |
| Model(s) | 47B |
47-32-07 BELL: (Was Mandatory Note 7 of AD-1H-1.) Applies to All Model 47B With Aircooled 6V4-178-B3, -B32, O-335-1, or O-335-3 Engines.
Compliance required not later than next 25-hour inspection after September 15, 1947.
To eliminate chafing of intake manifold balance pipe against the oil tank an extra piece of hose, Aircooled P/N 11868, should be installed on the pipe at the side of the tank where the oil filter is mounted and approximately 1 3/8 inches from the hose which connects the two manifold pipes.
(Franklin Service Bulletin No. 55 dated May 28, 1947, pertains to this same subject.)