AD 47-32-07

Active

Manifold Pipe Chafing

Key Information
47-32-07
Active
Not specified
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Rotorcraft"]
Scotts-Bell 47 Inc
47B
Regulatory Text

47-32-07 BELL: (Was Mandatory Note 7 of AD-1H-1.) Applies to All Model 47B With Aircooled 6V4-178-B3, -B32, O-335-1, or O-335-3 Engines.

Compliance required not later than next 25-hour inspection after September 15, 1947.

To eliminate chafing of intake manifold balance pipe against the oil tank an extra piece of hose, Aircooled P/N 11868, should be installed on the pipe at the side of the tank where the oil filter is mounted and approximately 1 3/8 inches from the hose which connects the two manifold pipes.

(Franklin Service Bulletin No. 55 dated May 28, 1947, pertains to this same subject.)

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents