AD 80-17-02

Active

Elevator Balance Weights

Key Information
80-17-02
Active
August 08, 1980
July 29, 1980
Unknown
39-3872
Applicability
["Aircraft"]
["Small Airplane"]
Piper Aircraft Inc.
PA-31 PA-31-325 PA-31-350
Regulatory Text

80-17-02 PIPER AIRCRAFT CORPORATION: Amendment 39-3872. Applies to the following Piper models of airplanes certificated in all categories: PA-31 and PA-31-325, S/N 31-7401201 through 31-8012076, 31-8012078, and 31-8012079; and PA-31-350, S/N 31-7405401 through 31-8052169 and 31-8052172.

Compliance is required within the next 50 hours time in service after the effective date of this AD unless already accomplished. To ensure flutter integrity of the elevator system, accomplish the following:

(a) Inspect the elevator balance weights for correct dimensions, and, if necessary, install correct elevator balance weights in accordance with Piper Aircraft Corporation Service Bulletin No. 690, dated July 7, 1980, or in an equivalent manner approved by the Chief, Engineering and Manufacturing Branch, FAA, Southern Region.

(b) Revise the part numbers on both elevators in accordance with Piper Aircraft Corporation Service Bulletin No. 690, dated July 7, 1980, or in an equivalent manner approved by the Chief, Engineering and Manufacturing Branch, FAA, Southern Region.

(c) Make appropriate maintenance record entry.

This amendment becomes effective August 8, 1980.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
--- - _EMPTY_
Issuing Office
["AIR-720: Operational Safety Branch"]
FAA Documents