AD 80-09-04

Active

Vertical Fin Fittings and Stabilator Attachments

Key Information
80-09-04
Active
April 24, 1980
April 04, 1980
Unknown
39-3749
Applicability
["Aircraft"]
["Small Airplane"]
Piper Aircraft Inc.
PA-34-200 PA-34-200T
Regulatory Text

80-09-04 PIPER AIRCRAFT CORPORATION: Amendment 39-3749. Applies to Model PA-34-200, serial numbers 34-E4, 34-7250001 through 34-7450220, Model PA-34-200T, serial numbers 34-7570001 through 34-7770441, airplanes certificated in all categories.

Compliance is required as indicated, unless already accomplished.

To prevent elongation or cracking of fitting holes and wearing of attaching nuts and bolts of the vertical fin attachment fittings and stabilator attachment and stabilator hinge assembly, accomplish the following within 25 hours time in service after the effective date of this AD:

a. Inspect, replace parts and modify, as necessary, the vertical fin attachment fittings and stabilator attachment and stabilator hinge assembly in accordance with Piper Aircraft Corporation Service Bulletin No. 579, dated November 14, 1977, or in an equivalent manner approved by the Chief, Engineering and Manufacturing Branch, FAA, Southern Region.

b. Make appropriate maintenancerecord entry.

This amendment becomes effective April 24, 1980.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
--- - _EMPTY_
Issuing Office
["AIR-720: Operational Safety Branch"]
FAA Documents