AD 78-01-02

Active

Elevator Bungee

Key Information
78-01-02
Active
January 03, 1978
December 19, 1977
Unknown
39-3107
Applicability
["Aircraft"]
["Small Airplane"]
Piper Aircraft Inc.
PA-31 PA-31-325 PA-31-350
Regulatory Text

78-01-02 PIPER: Amendment 39-3107. Applies to Piper Models PA-31 and PA-31-325 Serial Nos. 31-7612001 thru 31-7612080, 31-7612082 thru 31-7612091, 31-7612096, 31-7612099, 31-7612101, 31-7612102, 31-7612104, 31-7612105, 31-7612107 and 31-7612108, PA-31-350 Serial Nos. 31-7652001 thru 31-7652015, 31-7652017 thru 31-7652162, and 31-7652164 thru 31-7652170 certificated in all categories.

To prevent adverse stability or handling qualities due to incorrect tension in the elevator bungee, accomplish the following within the next 25 hours in service after the effective date of this Airworthiness Directive unless already accomplished.

(a) Inspect the elevator bungee spring for correct tension, (30 lb. + 1 lb. for model PA-31 and 37 lb. + 1, -0 for models PA-31-325 and PA-31-350).

(b) If the tension is not correct, before further flight alter the link in accordance with the "Instructions" section of Piper Service Bulletin No. 549 dated February 16, 1977, or equivalent approved by the Chief, Engineering and Manufacturing Branch, FAA, Eastern Region.

(c) Upon submission of substantiating data through an FAA Maintenance Inspector, the Chief, Engineering and Manufacturing Branch, FAA, Eastern Region may adjust the compliance time specified above.

This amendment is effective January 3, 1978.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
--- - _EMPTY_
Issuing Office
["AIR-720: Operational Safety Branch"]
FAA Documents