AD 77-07-03

Active

Electrical Terminals

Key Information
77-07-03
Active
April 04, 1977
March 18, 1977
Unknown
39-2860
Applicability
["Aircraft"]
["Small Airplane"]
Piper Aircraft Inc.
PA-31 PA-31-325 PA-31-350
Regulatory Text

77-07-03 PIPER AIRCRAFT CORPORATION: Amendment 39-2860. Applies to models PA-31, PA-31-325, S/N's 31-7612090, 31-7612091, 31-7612092, 31-7612096, 31-7612098, 31-7612101 thru 31-7612105, 31-7612107 thru 31-7612110, and 31-7712002 thru 31-7712006; PA-31-350, S/N's 31-7652142 thru 31-7652147, 31-7652149, 31-7652151, 31-7652152, 31-7652154 thru 31-7652162, 31-7652164, 31-7652165, 31-7652167, 31-7652168, 31-7652171 thru 31-7652174, 31-7652176, 31-7752002 thru 31-7752007, 31-7752009 thru 31-7752011, 31-7752013, 31-7752014 and 31-7752017 thru 31-7752026.

Compliance required within 100 hours in service.

To prevent electrical terminals form shorting against the relay cover, accomplish the following:

(a) Replace the spacer bushings in accordance with the instructions given in Service Bulletin No. 535, dated December 15, 1976, or with an equivalent method approved by the Chief, Engineering and Manufacturing Branch, FAA Eastern Region.

(b) Upon request, with substantiating data submitted through an FAA Maintenance Inspector, the compliance time specified in this AD may be increased by the Chief, Engineering and Manufacturing Branch, FAA Eastern Region.

This Amendment becomes effective April 4, 1977.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
--- - _EMPTY_
Issuing Office
["AIR-720: Operational Safety Branch"]
FAA Documents