AD 68-12-03

Active

High Compressor Rotor Blade Failure

Key Information
68-12-03
Active
June 12, 1968
Not specified
Unknown
39-608
Applicability
["Engine"]
Not specified
Pratt & Whitney Division
JT4A-10 JT4A-11 JT4A-12 JT4A-3 JT4A-5 JT4A-9
Regulatory Text

68-12-03 PRATT & WHITNEY: Amendment 39-608. Applies to all Model JT4A Series Turbojet Engines.
Compliance required as indicated unless previously accomplished.:
To preclude penetration of the diffuser case in the event of a high compressor rotor blade failure, accomplish the following:
Within the next 11,000 hours' time in service after the effective date of this AD, rework all P/N's 361176, 397231, 419006, 406242, 429614, 447328, and 450862 diffuser case assemblies in accordance with Pratt & Whitney Aircraft Turbojet Engine Service Bulletin No. 1033 dated September 8, 1965, and FAA-approved revisions or an equivalent modification approved by the Chief, Engineering and Manufacturing Branch, FAA Eastern Region.
This amendment becomes effective June 12, 1968.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents