85-25-03 SIKORSKY AIRCRAFT: Amendment 39-5172. Applies to Model S-64E helicopters, certificated in any category.
Compliance is required as indicated, unless already accomplished.
To prevent operation with a cracked main rotor head torque tube inner bracket, accomplish the following:
(a) Prior to the first flight of each day, after the effective date of this AD, visually inspect with a 10-power or higher magnifying glass the main rotor head torque tube inner bracket assembly, Part Number S1510-21332-0, for cracks and/or corrosion in accordance with Section 2, Paragraph A, of Sikorsky Alert Service Bulletin (ASB) No. 64B10-4A, dated July 17, 1985, or an FAA-approved equivalent.
(b) If the torque tube inner bracket assembly is cracked, replace with a serviceable torque tube inner bracket assembly prior to further flight in accordance with Section 2, Paragraph A, of Sikorsky ASB No. 64B10-4A, dated July 17, 1985, or an FAA-approved equivalent.
(c) If the torque tube inner bracket assembly is corroded, determine the extent and limits of the corrosion prior to further flight in accordance with Section 2, Paragraph A, of Sikorsky ASB-No. 64B10-4A, dated July 17, 1985, or an FAA-approved equivalent. If the extent or limits of the corrosion are exceeded, replace with a serviceable torque tube inner bracket assembly prior to further flight in accordance with Section 2, Paragraph A, of Sikorsky ASB No. 64B10-4A, dated July 17, 1985, or an FAA-approved equivalent. Otherwise, rework the torque tube inner bracket assembly prior to further flight in accordance with Section 2, Paragraph B, of Sikorsky ASB No. 64B10-4A, dated July 17, 1985, or an FAA-approved equivalent.
(d) Aircraft may be ferried in accordance with the provisions of FAR Sections 21.197 and 21.199 to a base where the AD can be accomplished.
(e) Upon request, an alternative means of compliance with the requirements of this AD which provide an equivalent level of safety maybe used when approved by the Manager, Boston Aircraft Certification Office, 12 New England Executive Park, Burlington, Massachusetts 01803, telephone (617) 273-7112.
Sikorsky ASB No. 64B10-4A, dated July 17, 1985, identified and described in this directive is incorporated herein and made a part hereof pursuant to 5 U.S.C. 552(a)(1). All persons affected by this directive who have not already received this document from the manufacturer may obtain copies upon request to Sikorsky Aircraft Division, United Technologies Corporation, North Main Street, Stratford, Connecticut 06601. These documents may also be examined at the Office of the Regional Counsel, FAA, Southwest Region, 4400 Blue Mound Road, Fort Worth, Texas 76106.
This amendment becomes effective December 30, 1985.