AD 68-19-01

Active

Suction Gage Markings

Key Information
68-19-01
Active
October 11, 1968
Not specified
Unknown
39-653
Applicability
["Aircraft"]
["Small Airplane"]
Aermacchi S.p.A.
S.205 - 22/R
Regulatory Text

68-19-01 SIAI-MARCHETTI: Amendment 39-653. Applies to Model S.205-22/R airplanes, Serial Nos. 213, 370, 371, 372, 373, 374, 378, 379, 380, 381, 382, 384, 385, 387, 388, 389, 390, 392, 393, 394, 395, 396, 398, 4-124, 4-125.

Compliance required within the next 100 hours' time in service after the effective date of this AD unless already accomplished.

Modify the limitation markings on the suction gage instrument, Siai P/N NS5F017, located on the right side of the instrument panel, by marking a green arc in the range from 4 inches Hg. to 5 inches Hg. and a red radial line at 5 inches Hg. and adjust the instrument's suction relief valve so that the suction gage reading is 4.5 + 0.1 inches Hg. at 2200 r.p.m., in accordance with Siai-Marchetti Service Bulletin No. 205B21 dated May 6, 1968, or later RAI-approved issue, or an FAA-approved equivalent. Check to insure that the suction gage reading does not exceed 5 inches Hg. at maximum engine r.p.m.

This amendment becomes effectiveOctober 11, 1968.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents