89-10-02 AEROSPATIALE: Amendment 39-6201.
Applicability: Model ATR42-300 series airplanes up to and including serial number 120, which have not been modified in accordance with Service Bulletin ATR42-28-0013, Revision 2, dated January 6, 1989, certificated in any category.
Compliance: Required as indicated, unless previously accomplished.
To prevent a fuel fire in the nacelle, accomplish the following:
A. Within 300 flight hours after the effective date of this AD and thereafter at intervals not to exceed 300 flight hours, and at each engine removal/installation, inspect the engine fuel supply hoses for fuel leakage in accordance with Aerospatiale Service Bulletin ATR42-28-0012, dated September 9, 1988. If leakage is found, before further flight, repair or replace the leaking fuel line, in accordance with the service bulletin.
B. Replacement of the engine fuel supply hoses in accordance with Aerospatiale Service Bulletin ATR42-28-0013, Revision 2, datedJanuary 6, 1989, constitutes terminating action for the repetitive inspections required by paragraph A., above.
C. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Standardization Branch, ANM-113, FAA, Northwest Mountain Region.
NOTE: The request should be forwarded through an FAA Principal Maintenance Inspector (PMI), who may add any comments and then send it to the Manager, Standardization Branch, ANM-113.
D. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of inspections and/or modification required by this AD.
All persons affected by this directive who have not already received the appropriate service documents from the manufacturer may obtain copies upon request to Aerospatiale, 316 Route de Bayonne, 31060 Toulouse, Cedex 03, France. These documents may be examined atthe FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or at the Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington.
This amendment (39-6201, AD 89-10-02) becomes effective on May 29, 1989.