AD 79-09-02

Active

Aileron Control Surfaces Drainage

Key Information
79-09-02
Active
May 07, 1979
Not specified
Unknown
39-3453
Applicability
["Aircraft"]
["Small Airplane"]
Cessna Aircraft Company
441
Regulatory Text

79-09-02 CESSNA: Amendment 39-3453. Applies to Model 441 (Serial Numbers 441-0001 through 441-0090) airplanes.

COMPLIANCE: Required as indicated, unless already accomplished.

To assure proper drainage of the aileron control surfaces, within the next 100 hours time-in-service after the effective date of this AD, accomplish the following:

A) Incorporate additional drainage of the ailerons by drilling new drain holes in accordance with the instructions provided in Cessna Propjet Service Information Letter PJ 79-3, dated March 5, 1979.

B) Any equivalent method of compliance with this AD must be approved by the Chief, Engineering and Manufacturing Branch, FAA, Central Region.

NOTE: The FAA has determined that there is insufficient justification to require mandatory compliance with the elevator portion of Cessna Service Information Letter PJ 79-3. Therefore, this AD is not applicable to elevator drainage improvements provided by that letter.

This Amendment becomes effective May 7, 1979.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents