AD 75-26-13

Active

Structural Flap Modification

Key Information
75-26-13
Active
January 15, 1976
Not specified
Unknown
39-2469
Applicability
["Aircraft"]
["Large Airplane"]
Textron Aviation Inc.
BH.125 Series 400A BH.125 Series 600A DH.125 Series 3A/R DH.125 Series 3A/RA DH.125 Series 400A
Regulatory Text

75-26-13 HAWKER SIDDELEY AVIATION: Amendment 39-2469. Applies to DH-125 series 3AR, S/N 25/148 and 149; series 3ARA, S/N 25/151, 152, 153, 155, 156, 158, 159, and NA 700 through NA 710; series 400 A, S/N NA 711 through NA 752 airplanes and to BH-125 series 400 A, S/N NA 753 through NA 780; and series 600A, S/N 25/6001 through 6004, 6007, 6009, 6010, 6011, 6013, 6014, 6016, 6018, 6020, 6022 through 6026, 6032, 6034, 6038, 6040, 6044, 6046, 6047, and 6051 airplanes.

Compliance required within the next 100 hours' time in service after the effective date of this AD, unless already accomplished.

To prevent structural damage to the inboard end of the flaps which can result from landing on heavily watered, or slush, or snow covered runways, incorporate the structural modification to the inboard end of the flap (L/H & R/H) in accordance with the accomplishment instructions in Hawker Siddeley Aviation Ltd. Service Bulletin 27-112 (2426), Revision 1, dated March 11, 1975, or an FAA-approved equivalent.

This amendment becomes effective on January 15, 1976.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents