46-33-02 GLOBE: (Was Mandatory Note 2 of AD-766-5.) Applies to Models GC-1A, GC-1B Aircraft Serial Numbers 3 to 174 Inclusive.
Compliance required prior to October 1, 1946.
Install stiffeners, Globe P/N 11-213-1471-1 R & L, on the flange of the upper bulkhead at fuselage Station 167, with six rivets per stiffener, to prevent the formation of cracks originating at the joggles in the flange outboard of the stabilizer attachment points. Any crack should be stop drilled. If it extends into the web of the bulkhead an 0.040-inch 24ST alclad reinforcing plate extending to the flange should be installed on the web with rivets spaced not more than 3/4 inches apart.
(Globe Customer Service Maintenance Bulletin No. 2 covers this same subject.)