47-25-06 GLOBE: (Was Mandatory Note 10 of AD-766-5.) Applies to Models GC-1A and GC-1B Aircraft Serial Numbers 3 to 157 Inclusive, and Number 159.
Compliance required prior to August 1, 1947.
Remove the carburetor flexible air duct, P/N 11-440-3405 and metal air intake scoop, at point of attachment at rear right engine cylinder and outboard connection to the right exhaust heater shroud. Replace with flexible air duct, Globe P/N 11-440-3648, and elbow, Globe P/N 11- 440-3729. This is necessary to prevent collapsing of the air duct when the carburetor air heater is used.
(Globe Customer Service Maintenance Bulletin No. 5 covers this same subject.)