AD 47-51-05

Active

Aileron Horn

Key Information
47-51-05
Active
Not specified
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Large Airplane"]
Airlift International, Inc. Curtiss-Wright Corporation Flying Tiger Line, Inc. L. B. Smith Aircraft Corporation Skyways International Trading and Transport Co. Tempo Design Corporation
C-46A C-46D C-46F C-46R C-46E C-46A C-46D C-46E C-46F C-46A C-46D C-46F C-46F C-46/CW20-T Super C-46/CW20-T
Regulatory Text

47-51-05 CURTISS-WRIGHT Applies to Model C-46 Series Aircraft Equipped with Aileron Horn Assembly, Curtiss-Wright P/N 20-050-5715.

Compliance required within 100 hours' time in service after the effective date of this amendment unless already accomplished.

The aileron horns part 20-050-5715 have failed due to cracking of the horn between the attaching bolt holes and the outer edge. Inspection should be made to determine if this part has been replaced by P/N SK-10213. If not, part 20-050-5715 which is a casting should be replaced by a machined horn manufactured from 24ST material in accordance with Curtiss-Wright Drawing No. SK-10213.

(Army Technical Order 01-25L-102 also covers this same subject.)

Revised December 28, 1964.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents