AD 47-06-02

Active

Landing Gear Retraction Placard

Key Information
47-06-02
Active
Not specified
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Small Airplane"]
Swift Museum Foundation, Inc.
GC-1A GC-1B
Regulatory Text

47-06-02 GLOBE: (Was Mandatory Note 5 of AD-766-5.) Applies to Models GC-1A and GC-1B Aircraft Serial Numbers 3 to 408 Inclusive; 1004 to 1319 Inclusive; and 2001 to 2239 Inclusive.

Compliance required prior to April 1, 1947.

Replace the warning placard located at the landing gear emergency extension crank with a revised placard, Globe P/N 11-532-3735, having the added instruction: "Crank back to the full up position before the next retraction of the landing gear". Complete rewinding is necessary to prevent damage to the retraction system.

(Globe Customer Service Maintenance Bulletin No. 6 covers this same subject.)

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents