AD 52-08-01

Active

Fuel Tank Seal

Key Information
52-08-01
Active
Not specified
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Large Airplane"]
Lockheed Aircraft Corporation
18
Regulatory Text

52-08-01 LOCKHEED: Applies to Certificated Army and Navy Versions of the Model 18 Aircraft Designated C57, C57B, R50-1, R50-2, R50-3, R50-5, R50-6, C60, C60A and C59.

Compliance required at next annual inspection, but in no event later than June 1, 1953.

Inspect all Lockheed Model 18 Series aircraft which have been converted from a military version to civil status, for compliance with Lockheed Drawing No. 50829, change A, to provide seal at the inboard end of the integral fuel tanks (inside fuselage) to prevent gasoline fumes from accumulating in the passenger compartment in case of fuel tank leakage. Inspection of the area can be accomplished by removal of the overhead panels adjacent to the fuselage skin in the No. 3 and No. 4 baggage compartments or by removing floor panels in the cabin.

Diaphragms and vents must be installed in accordance with Lockheed Drawing No. 50829 (or equivalent).

(Drawing No. 50829, change A, covering the required installation may be obtained from Lockheed Aircraft Corp., Burbank, Calif.)

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents