AD 77-15-15

Active

Cabin pressure

Key Information
77-15-15
Active
August 29, 1977
Not specified
Unknown
39-2986
Applicability
["Aircraft"]
["Large Airplane"]
Airbus SAS
BAC 1-11 200 Series BAC 1-11 400 Series
Regulatory Text

77-15-15 BRITISH AIRCRAFT CORPORATION: Amendment 39-2986. Applies to BAC 1- 11 200 and 400 series airplanes, certificated in all categories.

Compliance is required within the next 200 hours time in service after the effective date of this AD, unless already accomplished.

To prevent the inadvertent loss of cabin pressure due to failure of the light alloy stop on the cabin pressure discharge valve manual control, replace the light alloy stop, P/N AB55-2301, on the gear wheel and drum assembly of the air conditioning discharge valve manual control (P/N AB55A-2425 or ED55A779) with an improved strength stop, P/N AB55-3433, or an FAA-approved equivalent.

(British Aircraft Corporation Service Bulletin No. 21-PM 5139, Revision 2, dated September 5, 1973, applies to this same subject.)

This amendment becomes effective August 29, 1977.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents