87-03-07 BOEING: Amendment 39-5523. Applies to Boeing Model 767-200 airplanes equipped with Bendix brakes, Part Numbers 2607092-1 and -2, certificated in any category. To preclude possible runway overshoot during certain runway-limited takeoffs or landings, due to erroneous braking performance information in the Airplane Flight Manual (AFM), accomplish either paragraph A. or B., below, within 30 days after the effective date of this AD, unless already accomplished. \n\n\tA.\tAmend the applicable FAA-approved AFM's, Boeing Documents D6T11320 and D6T11321, to include the information contained in subject FAA-approved revisions below: \n\n\tD6T11320.222, Revision 13; \n\tD6T11320.231, Revision 13; \n\tD6T11321.223, Revision 16; \n\tD6T11321.232, Revision 16; \n\tRevision 2 to Appendix 8F to D6T11321; or \n\n\tB.\tAmend the applicable FAA-approved AFM's, Boeing Documents D6T11320 and D6T11321, by incorporating the following performance adjustments: \n\n\t\t1.\tTAKEOFF SPEEDS - Pre-correction (original) V1 speeds are reduced by two (2) knots for gross weights of 280,000 lbs. and greater, and by one (1) knot for gross weights below 280,000 lbs. \n\n\t\t2.\tTAKEOFF PERFORMANCE-LIMITED WEIGHTS - Pre-correction FIELD LENGTH LIMITS weights are reduced by: \n\n\n\n FIELD LENGTH\nLIMITED WEIGHT 1000 LBS.\nWEIGHT DECREMENT (LBS.) FOR FLAP POSITION SHOWN \t\t\t \n\t\t\t\t\n\t\t\t\t\t\t\t 1\t 5\t 15\t 20\n\t380 & Above\t\t\t\t\t4900\t4900\t4400\t4500\n\t360\t\t\t\t\t\t4600\t4700\t4400\t4300\n\t340\t\t\t\t\t\t4300\t4500\t4300\t4000\n\t320\t\t\t\t\t\t4000\t4100\t4000\t3600 \n\t300\t\t\t\t\t\t3600\t3500\t2600\t2500 \n\t280\t\t\t\t\t\t2800\t2100\t1300\t1300 \n\t260\t\t\t\t\t\t1200\t1100\t1200\t1200 \n\t240 & Below\t\t\t\t\t1000\t1100\t1200\t1200 \n\n\tTo determine corrected runway length (as in obstacle clearance calculations), increase gross weight by the above amounts before entering the FIELD LENGTH LIMITS chart. \n\t\t3.\tLANDING FIELD LENGTH LIMITS - For gross weights above 280,000 lbs., landing field length required is increased by 900 feet over the pre-correction value. For gross weights of 280,000 lbs. and below, the landing field length required is increased by 350 feet over the pre-correction value. \n\n\tC.\tAn alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Seattle Aircraft Certification Office, FAA, Northwest Mountain Region. \n\n\tAll persons affected by this directive who have not already received copies of the Airplane Flight Manual performance information may obtain copies upon request to the Boeing Commercial Airplane Company, P.O. Box 3707, Seattle, Washington 98124-2207. These documents may be examined at the FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or the Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington. \n\n\tThis amendment becomes effective February 26, 1987.