AD 63-02-01

Active

Anticollision Light Upper Fairing

Key Information
63-02-01
Active
February 12, 1963
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Large Airplane"]
The Boeing Company
707-100 Long Body 707-100B Long Body 707-100B Short Body 707-200 707-300 Series 707-300B Series 707-300C Series 707-400 Series 720 Series 720B Series
Regulatory Text

63-02-01 BOEING: Amdt. 527 Part 507 Federal Register January 11, 1963. Applies to All 707/720 Series Aircraft. \n\n\tCompliance required within the next 500 hours' time in service, unless already accomplished. \n\n\tThe upper and lower fairings installed over the anticollision lights have been found to disturb the light distribution in certain peripheral areas. To prevent a reduction in the effective light intensity: \n\n\t(a)\tRemove the anticollision light upper fairing, (P/N's 69-10789, 9-66041-3000) and the lower fairing, (P/N's 69-10789-1, 9-66041 or 9-66041-3000); and \n\n\t(b)\tPlug the mounting holes for the fairing assembly fasteners with Boeing material specification 5-13 Type A aerodynamic smoother or equivalent. \n\n\t(Boeing Service Bulletin No. 1651 covers the same subject.) \n\n\tThis directive effective February 12, 1963.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents