AD 60-03-03

Active

Elevator Rivets

Key Information
60-03-03
Active
Not specified
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Large Airplane"]
Maryland Air Industries, Inc.
F-27 F-27A F-27B
Regulatory Text

60-03-03 FAIRCHILD: Amdt. 94 Part 507 Federal Register January 29, 1960. Applies to Models F-27, F-27A, and F-27B, Serial Numbers 1 to 64 inclusive.

Compliance required by February 15, 1960.

As a result of investigation of loose rivets in the rudder and elevator tension regulator assembly, P/N 0501101-0 or 0501101-1, the following must be accomplished:

Replace "cherry" rivets attaching the elevator bellcrank to tension regulator assembly with bolts, P/N 27-720003-9.

Assemblies already modified by replacing the "Cherry" rivets with AN 470DD rivets are acceptable. However, further use of AN 470DD rivets in this assembly is prohibited due to the difficulty of installing these rivets without seriously damaging the bellcrank. If AN 470DD rivets are replaced or removed, they shall be replaced with bolts, P/N 27-720003-9. (Fairchild Service Bulletin No. 27-16, revised September 8, 1959, covers this subject.)

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents