AD 65-11-03

Active

Radio Transfer Switch Aassembly

Key Information
65-11-03
Active
May 20, 1965
Not specified
Unknown
39-68
Applicability
["Aircraft"]
["Large Airplane"]
Lockheed Aircraft Corporation
1049C-55 1049E-55 1049G-82 1049H-82
Regulatory Text

65-11-03 LOCKHEED: Amdt. 39-68 Part 39 Federal Register May 20, 1965. Applies to Models 1049C, 1049E, 1049G, and 1049H Series Aircraft Equipped with Lockheed Radio Transfer Switch Assembly, P/N 319122.

Compliance required within the next 300 hours' time in service after the effective date of this AD unless already accomplished.

Disassemble each radio transfer switch assembly, P/N 319122, without unsoldering the wiring and visually inspect each part of the switch assembly for wire clippings. Remove any clippings found and reassemble the switch assembly before further flight.

NOTE: During the inspection required by this AD, particular attention should be given to the switch wafers.

This directive effective May 20, 1965.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents