AD 70-14-06

Active

Fire Wall To Compressor Seal

Key Information
70-14-06
Active
August 16, 1970
Not specified
Unknown
39-1029
Applicability
["Aircraft"]
["Rotorcraft"]
Bell Helicopter Textron Canada Limited
206A
Regulatory Text

70-14-06 BELL: Amendment 39-1029. Applies to Model 206A Helicopters, S/N 4 thru 448, 460 thru 464, 467, 469 thru 473 and 475 thru 477, certificated in all categories.

Compliance required not later than 300 hours time in service after the effective date of this Airworthiness Directive, unless already accomplished.

To relieve engine compressor flange loads, replace existing fire-wall-to-compressor seal with a new improved firewall seal kit, Bell Part No. 206-704-026-1, in accordance with applicable paragraphs of Bell Service Letter 206A-142, dated November 5, 1969, or later FAA approved revision. Equivalent methods of compliance must be approved by the Chief, Engineering and Manufacturing Branch, Flight Standards Division, Southwest Region, Federal Aviation Administration.

This amendment becomes effective August 16, 1970.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents