AD 75-11-11

Active

Gear Box Shaft and Gear Assy

Key Information
75-11-11
Active
December 02, 1975
Not specified
Unknown
39-2432
Applicability
["Aircraft"]
["Rotorcraft"]
Erickson Air-Crane
S-64E S-64F
Regulatory Text

75-11-11 SIKORSKY AIRCRAFT: Amendment 39-2217 as amended by Amendment 39-2432. Applies to all Sikorsky Aircraft Model S-64E and Model S-64F helicopters. To prevent failure of the torquemeter engine to gearbox shaft and gear assembly and consequent secondary damage to the main rotor control system components, remove prior to further flight, torquemeter engine to gearbox shaft and gear assemblies, P/N 6435-20564-042, with 3000 or more hours total time in service. Replace those assemblies removed with P/N 6435-20564-042 assemblies which have less than 3000 hours total time in service, or with P/N 6435-20564-044 assemblies, or with an equivalent approved by the Chief, Engineering and Manufacturing Branch, FAA, New England Region. All replacement P/N 6435-20564-042 assemblies must be removed prior to the accumulation of 3000 hours time in service.

Amendment 39-2217 became effective upon publication in the Federal Register for all persons except those to whom it was made effective immediately by telegram.

This amendment 39-2432 becomes effective December 2, 1975.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents