AD 76-09-11

Active

Crank Arm or Servo Valve Assembly

Key Information
76-09-11
Active
May 14, 1976
Not specified
Unknown
39-2615
Applicability
["Aircraft"]
["Large Airplane"]
Lockheed Martin Corporation
382 382B 382E 382F 382G
Regulatory Text

76-09-11 LOCKHEED: Amendment 39-2601 as amended by Amendment 39-2615. Applies to all Model 382 series airplanes below serial number 4673. Before further flight, unless already accomplished, perform the crank arm inspection for rudder, aileron and elevator in accordance with Lockheed Alert Service Bulletin A 382-27-17. If the crank arms do not pass the inspection requirements, replace the crank arm or servo valve assembly prior to further flight.

The Lockheed Alert Service Bulletin stated that acceptable replacement cranks were identified with a "V" index mark. However, some of the replacement cranks are being made from a different material than those identified with a "V" index mark. These new cranks are identified with a straight line index mark and either of the cranks identified with a "V" or a straight line index mark are acceptable.

Amendment 39-2601 was effective May 14, 1976 and was effective on receipt for all recipients of the telegram dated April 23, 1976, whichcontained this amendment.

This Amendment 39-2615 becomes effective immediately.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents