AD 47-10-28

Active

Elevator Cable Seal Holes

Print / Email Back to ADs
Key Information
47-10-28
Active
Not specified
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Large Airplane"]
Lockheed Aircraft Corporation
49-46
Regulatory Text

47-10-28 LOCKHEED: (Was Mandatory Note 31 of AD-763-3.) Applies to All Model 49 Serials Up to and Including 2088.

Compliance required prior to July 1, 1947.

Enlarge holes in elevator cable seals in aft pressure bulkhead to 0.19 + 0.031-inch diameter.

(LAC Service Bulletin 49/SB-208 covers this same subject.)

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents
View Official AD on FAA Website Opens in new tab