AD 59-17-04

Active

Wing Spar Attaching Bolts

Key Information
59-17-04
Active
Not specified
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Small Airplane"]
Revo, Incorporated
Colonial C-1 Colonial C-2
Regulatory Text

59-17-04 COLONIAL: Applies to All Models C-1 and C-2 Aircraft.

Compliance required within the next 10 hours but not later than October 15, 1959, and at each 100 hours thereafter.

Due to failures in service, remove, inspect, and replace, if damaged, the two AN 4 bolts attaching the wing rear spar to the hull on each side at hull Station 138. The bolts are located adjacent to the inboard flap hinge and are accessible through the wheel wells. Remove only one bolt per side at a time and replace before removing the other bolt. The torque applied to these bolts shall not exceed 70 inch-pounds.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents