86-19-14 SIKORSKY AIRCRAFT: Amendment 39-5505. Applies to all Model S-76A and S-76B helicopters, certificated in any category, equipped with tail rotor blade assemblies as follows:
MODEL
PART NUMBERS
SERIAL NUMBERS
S-76A
76101-05001 or
A1 37-00766, -00774, -00775,
76101-05101
-00779,-00781, -00783, and -00785
S-76B
76101-05501
A245-00025, -00026, -00027, -00028, -00037, -00040, -00041, and -00047
Compliance is required as indicated, unless already accomplished.
To prevent possible operation with an improperly manufactured tail rotor assembly, accomplish the following:
(a) Prior to further flight after receipt of this AD, remove the above listed serial numbered tail rotor assemblies/spars, and replace with a serviceable part. The above listed serial numbered tail rotor assemblies/spars marked with the suffix (X) are serviceable parts.
(b) Aircraft may be ferried in accordance with the provisions of FAR Sections 21.197 and 21.199 to a base where the requirements of this AD may be accomplished.
(c) Upon request, an alternate means of compliance which provides an equivalent level of safety with the requirements of this AD may be approved by the Manager, Boston Aircraft Certification Office, New England Region, Federal Aviation Administration, 12 New England Executive Park, Burlington, Massachusetts 01803, telephone (617) 273-7118.
(d) Upon submission of substantiating data by an owner or operator, through an FAA maintenance inspector, the Manager, Boston Aircraft Certification Office, New England Region, Federal Aviation Administration, 12 New England Executive Park, Burlington, Massachusetts 01803, telephone (617) 273-7118, may adjust the compliance time specified in this AD.
This amendment becomes effective January 30, 1987, as to all persons except those persons to whom it was made immediately effective by individual priority letter AD No. 86-19-l4 issued September 23, 1986, which contained this amendment.