AD 62-13-02

Active

Automatic Pilot Trim Servo Wire Bundle

Key Information
62-13-02
Active
May 30, 1962
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Large Airplane"]
The Boeing Company
707-100 Long Body 707-100B Long Body 707-100B Short Body 707-200 707-300 Series 707-300B Series 707-300C Series 707-400 Series 720 Series 720B Series
Regulatory Text

62-13-02\tBOEING: Amdt. 446 Part 507 Federal Register May 30, 1962. Applies to 707 and 720 Series Aircraft Listed in Boeing Service Bulletin No. 1698 Dated May 16, 1962.\n \n\tCompliance required as indicated. \n\n\tAs a result of several cases of damaged wiring in the automatic pilot trim servo wire bundle, accomplish the following one-time inspection: \n\n\tWithin the next 150 hours' time in service after the effective date of this AD unless already accomplished, inspect the wire bundle connected to the autopilot trim servostabilizer limit switches, and stabilizer position transmitter in accordance with Boeing Service Bulletin No. 1698 dated May 16, 1962. If damage is found, repair or replace the wire bundle prior to further flight. \n\n\tThis directive effective May 30, 1962.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents