AD 84-04-03

Active

Jumper Cords

Key Information
84-04-03
Active
April 09, 1984
Not specified
Unknown
39-4821
Applicability
["Aircraft"]
["Balloon"]
JR Aerosports, LTD
Firefly 7B
Regulatory Text

84-04-03 THE BALLOON WORKS: Amendment 39-4821. Applies to Model Firefly 7B (Twelve Gore) (Serial Numbers F7B-009, F7B-011 through F7B-044, and F7B-046 through F7B- 080) Hot Air Balloons certificated in any category.

Compliance: Required within the next 10 hours time in service after the effective date of this AD, unless already accomplished.

To prevent breakage of jumper cords, which may result in uncontrollable descent, accomplish the following:

(a) Lengthen each envelope jumper cord, shorten each centering cord, inflate envelope and examine valve fit and adjust, if necessary, in accordance with The Balloon Works Service Bulletin No. B20, dated June 29, 1983.

(b) An equivalent means of compliance with this AD may be used if approved by the Manager, Atlanta Aircraft Certification Office, FAA Central Region, 1075 Inner Loop Road, College Park, Georgia 30337.

This amendment becomes effective on April 9, 1984.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents