AD 69-25-03

Active

Engine Cone Bolt Failures

Key Information
69-25-03
Active
December 05, 1969
Not specified
Unknown
39-884
Applicability
["Aircraft"]
["Large Airplane"]
The Boeing Company
727-100 Series 727-100C Series 727-200 Series 727-200F Series 727 Series 727C Series
Regulatory Text

69-25-03\tBOEING: Amdt. 39-884. Applies to Model 727 series airplanes listed in Boeing Service Bulletin 71-43 dated 10 November 1969, or later FAA approved revisions. \n\n\tCompliance required within the next 500 hours time in service after the effective date of this AD, unless already accomplished. \n\n\tTo prevent engine cone bolt failures, accomplish the inspections and bolt replacement in accordance with the instructions in Boeing Service Bulletin 71-43, dated 10 November 1969, Section II, Pages 4, 5, and 6, Steps A through F, or later FAA approved revisions, or an equivalent inspection and replacement procedure approved by the Chief, Aircraft Engineering Division, FAA Western Region. \n\n\tThis amendment becomes effective December 5, 1969.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents