AD 46-13-05

Active

Control Boot Assemblies

Key Information
46-13-05
Active
Not specified
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Large Airplane"]
The Boeing Company
DC3-G102 DC3-G102A DC3-G103A DC3-G202A DC3A-S1C3G DC3A-S1CG DC3A-S4C4G DC3A-SC3G DC3A-SCG DC3C-R-1830-90C DC3C-S1C3G DC3C-S4C4G DC3C-SC3G DC3D-R-1830-90C
Regulatory Text

46-13-05 DOUGLAS: (Was Mandatory Note 10 of AD-618-3 and Mandatory Note 12 of AD-669-3.) Applies to All DC3 Aircraft. \n\n\tTo be accomplished not later than April 1, 1947. \n\n\tReplace all canvas control boot assemblies either with the new rubber control column boot assemblies of the same part number (No. 5035184-16 and -17), as called for on Douglas Service Bulletin No. 231, or with the following boot assemblies: \n\n\t(a)\tThompson Co. (H.I. Thompson Co., 1733 Cordova St., Los Angeles 7, Calif.), No. 11-21001, change B, for Models DC3-C/C-47 and DC-3-D/C117A. \n\n\t(b)\tThompson Co. No. 11-21002, change A, for Model DC3. \n\n\t(c)\tAmerican Airlines Drawing No. CDS-6132. \n\n\tPending replacement, the canvas boots should be inspected prior to each flight to determine that the top of the boot is tight around the control assembly and the pocket around the base is eliminated.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents