AD 78-07-09

Active

Depressurization Vent

Key Information
78-07-09
Active
May 10, 1978
Not specified
Unknown
39-3177
Applicability
["Aircraft"]
["Large Airplane"]
The Boeing Company
747-100 Series 747-100B Series 747-100B SUD Series 747-200B Series 747-200C Series 747-200F Series 747-300 Series 747-400 Series 747-400D Series 747-400F Series 747SP Series 747SR Series
Regulatory Text

78-07-09 BOEING: Amendment 39-3177. Applies to Model 747 series airplanes listed in Boeing Service Bulletin 747-25-2306 certificated in all categories. Compliance required as indicated. To assure proper operation of the depressurization vent modification required by AD 75-15-05, on or before June 30, 1978, unless already accomplished, inspect and rework the cargo compartment lining in accordance with Boeing Service Bulletin 747-25-2418, dated December 27, 1977, or later FAA approved revision, or in a manner approved by the Chief, Engineering and Manufacturing Branch, FAA Northwest Region.\n \tThe manufacturer's specifications and procedures identified and described in this directive are incorporated herein and made a part hereof pursuant to 5 U.S.C. 552(a)(1).\n \tAll persons affected by this directive who have not already received these documents from the manufacturer, may obtain copies upon request to Boeing Commercial Airplane Company, P.O. Box 3707, Seattle, Washington 98124.These documents may also be examined at FAA Northwest Region, 9010 East Marginal Way South, Seattle, Washington 98108. \n\n\tThis amendment becomes effective May 10, 1978.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents