AD 86-05-06

Active

Elevator Control Forward Override Assembly Cam

Key Information
86-05-06
Active
April 10, 1986
Not specified
Unknown
39-5244
Applicability
["Aircraft"]
["Large Airplane"]
The Boeing Company
757-200 Series
Regulatory Text

86-05-06 BOEING: Amendment 39-5244. Applies to all Model 757-200 series airplanes listed in Boeing Service Bulletin 757-27-0057, Revision 1, dated October 17, 1985, certificated in any category. \n\n\tTo eliminate the possibility of the elevator forward override mechanism becoming jammed, accomplish the following, unless already accomplished: \n\n\tA.\tWithin the next 60 days after the effective date of this AD, remove and replace the elevator control forward override assembly cam with a revised cam in accordance with Boeing Service Bulletin 757-27-0057, Revision 1, dated October 17, 1985, or later FAA- approved revision. \n\n\tB.\tSpecial flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of the modifications required by this AD. \n\n\tAll persons affected by this proposal who have not already received the appropriate service document from the manufacturer may obtain copies upon request to the Boeing Commercial Airplane Company, P.O. Box 3707, Seattle, Washington 98124-2207. This document may be examined at the FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or the Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington. \n\n\tThis amendment becomes effective April 10, 1986.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents