80-06-03 CESSNA: Amendment 39-3713. Applies to the following models and serial number airplanes certificated in all categories:
MODELS
SERIAL NUMBERS
150M
15078506 through 15079405
A150M
A1500685 through A1500734
152
15279406 through 15283354
A152
A1500433, A1520735 through A1520867
172N
17261445, 17267585 through 17272447
R172K
R1722000 through R1723127
COMPLIANCE: Required as indicated unless already accomplished.
To assure continued structural integrity of the wing flap direct cable, thereby preventing possible sudden unexpected retraction of the left wing flap accomplish the following:
A) Prior to or upon accumulation of 1000 hours time-in-service for airplanes with less than 900 hours time-in-service on the effective date of this AD or within the next 100 hours time-in-service after the effective date of this AD for airplanes having 900 hours or more time-in-service on the effective date of this AD:
Install a new Cessna Part Number 0560037-1 flap follow-up cable clamp and associated hardware in accordance with instructions in Cessna Single Engine Customer Care Service Information Letters SE79-16 and SE79-16 (Supplement #1) and Cessna Service Kit SK172-60A dated May 3, 1979.
B) A special flight permit, in accordance with FAR 21.197, is permitted for the purpose of moving affected airplanes to a location where the modification required by this AD can be accomplished.
C) Any equivalent means of compliance with this AD must be approved by the Chief, Engineering and Manufacturing District Office #43, Wichita, Kansas, Telephone (316) 942-4219.
This amendment becomes effective April 21, 1980.