AD 74-21-03

Active

Lavatory Waste Containers

Key Information
74-21-03
Active
November 10, 1975
Not specified
Unknown
39-2376
Applicability
["Aircraft"]
["Large Airplane"]
The Boeing Company
707-100 Long Body 707-100B Long Body 707-100B Short Body 707-200 707-300 Series 707-300B Series 707-300C Series 707-400 Series 720 Series 720B Series 727-100 Series 727-100C Series 727-200 Series 727-200F Series 727 Series 727C Series 737-100 Series 737-200 Series 737-200C Series 737-300 Series 737-400 Series 737-500 Series 737-600 Series 737-700 Series 737-800 Series 747-100 Series 747-100B Series 747-100B SUD Series 747-200B Series 747-200C Series 747-200F Series 747-300 Series 747-400 Series 747-400D Series 747-400F Series 747SP Series 747SR Series
Regulatory Text

74-21-03 BOEING: Amendment 39-1986 as amended by Amendment 39-2376. Applies to all Boeing models 707/720/727/737/747 series airplanes, certificated in all categories. Compliance required as indicated unless already accomplished. To reduce potential fire hazard, existing in lavatory waste containers accomplish the following: \n\n\tA.\tWithin 300 hours time in service from the effective date of this AD, unless already accomplished within the last 1,000 hours, visually inspect all electrical appurtenances, including wiring, terminal boxes, switches, and hot water heaters, physically located within lavatory waste container areas, for wear, abrasion and corrosion. Remove and replace as necessary. \n\tB.\tBy December 31, 1975, unless already completed, accomplish lavatory rework in accordance with the following Boeing Service Bulletins, as applicable, or later FAA approved revisions, or in a manner approved by the Chief, Engineering and Manufacturing Branch, FAA Northwest Region: \n\n\tModelService Bulletin Number \n\t727\t\t727-25-211 \n\t747\t\t747-25-2245 \n\n\tC.\tBy June 30, 1976, unless already accomplished, accomplish lavatory rework in accordance with the following Boeing Service Bulletins, as applicable, or later FAA approved revisions, or in a manner approved by the Chief, Engineering and Manufacturing Branch, FAA Northwest Region: \n\n\tModel\t\tService Bulletin Number \n\t707/720\t\t1270, 1363, 1365, 3146 \n\t737\t\t737-25-1096 or 737-25-1108 \n\n\tThe manufacturer's specifications and procedures identified and described in this directive are incorporated herein and made a part hereof pursuant to 5 U.S.C. 552(a)(1). \n\tAll persons affected by this directive who have not already received these documents from the manufacturer may obtain copies upon request to Boeing Commercial Airplane Company, P. O. Box 3707, Seattle, Washington 98124. The documents may also be examined at FAA Northwest Region, 9010 East Marginal Way South, Seattle, Washington. \n\n\tAmendment 39-1986 became effective November 15, 1974. \n\n\tThis amendment 39-2376 becomes effective November 10, 1975.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents