AD 63-14-01

Active

Fuel Tank Adapter

Key Information
63-14-01
Active
July 29, 1963
Not specified
Unknown
N/A
Applicability
["Aircraft"]
["Large Airplane"]
The Boeing Company
707-100 Long Body 707-100B Long Body 707-100B Short Body 707-200 707-300 Series 707-300B Series 707-300C Series 707-400 Series 720 Series 720B Series
Regulatory Text

63-14-01 BOEING: Amdt 580 Part 507 Federal Register June 27, 1963. Applies to All Models 707 and 720 Series Aircraft. \n\n\tCompliance required within the next 2,000 hours' time in service after the effective date of this AD unless already accomplished. \n\n\tThere have been a number of instances of separation of the two-piece fuel tank adapter, Boeing P/N 10-3062-1, during pressure fueling. This has resulted in a potentially hazardous fire condition from spillage of fuel. \n\n\tTo prevent further fuel spillage from this cause, replace the two-piece fuel tank adapter, Boeing P/N 10-3062-1, with the one-piece fuel tank adapter, Boeing P/N 10-3062-2, on the pressure fueling receptacles. \n\n\t(Boeing Service Bulletin No. 715 covers this subject.) \n\n\tThis directive effective July 29, 1963.

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
FAA Documents