46-43-02 DOUGLAS: (Was Mandatory Note 12 of AD-618-3 and Mandatory Note 13 of AD-669-3.) Applies Only to DC3 Series Aircraft Having the No. 4118923 Magnesium Alloy Casting Rudder Pedal Slide Tube Support. \n\n\tTo be accomplished not later than January 1, 1947. \n\n\tInstall a third AN 3-21 bolt in the existing hold between the two holes now having AN 3-21 bolts in the attachment of the Rudder Pedal Slide Tube Support No. 4118923 and -1, to its Pedal Assembly (5118929, 5118931, and 5118928). If necessary, to correct misalignment among the three holes, it is permissible to use 24ST or 4130 bushing with 1/32-inch wall thickness. This additional bolt is necessary to insure the 100% margin of safety required on the magnesium casting. \n\n\t(Douglas Service Bulletin C-47-101 covers this same subject.)