78-10-01 BEECH: Amendment 39-3210. Applies to Beech Models D18C, D18S, E18S, E18S-9700, G18S, H-18, C-45G, TC-45G, C-45H, TC-45J (SNB-5), JRB-6, 3N, 3M and 3NM modified in accordance with STC SA1243WE, SA1016WE, or SA360WE. \n\n\tTo preclude failure of the lower rudder torque tube, accomplish the following; unless already accomplished: \n\n\t(a)\tWithin the next 30 days after the effective date of this AD visually inspect the lower rudder torque tube for cracks in the area of the access hole as noted in figure 1 of this AD. (Reference Part Number 452606-7). \n\n\t(b)\tIf no cracks are found, reinspect at intervals not to exceed 30 days from the prior inspection. \n\n\t(c)\tIf cracks are found, prior to further flight: \n\n\t\t(1)\tIf any crack exceeds 1/2 inch in length, replace with a like serviceable unit, Part Number 452606-7, and reinspect per paragraph (d); \n\n\t\t(2)\tIf cracks are 1/2 inch or less in length, repair per a method approved by the Chief, Aircraft Engineering Division, FAAWestern Region, and reinspect per paragraph (d); \n\n\t(d)\tReinspect at intervals not to exceed 30 days from repair, replacement, or prior inspection. \n\n\t(e)\tThe requirements of this AD may be terminated when modifications are incorporated which are approved by the Chief, Aircraft Engineering Division. Submit proposed modifications schemes to: \n\n\tChief, Aircraft Engineering Division \n\tFAA Western Region \n\tP.O. Box 92007 \n\tWorldway Postal Center \n\tLos Angeles, California 90009 \n\nfor review and approval. \n\n\tThis amendment becomes effective May 17, 1978.