AD 58-01-06

Active

Stabilizer Fitting

Key Information
58-01-06
Active
Not specified
February 20, 1958
Unknown
N/A
Applicability
["Aircraft"]
["Small Airplane"]
Piper Aircraft Inc.
PA-23
Regulatory Text

58-01-06 PIPER: Applies to Model PA-23 Aircraft, Serial Numbers 23-1 to 23-1219 Inclusive.

Compliance required as indicated.

Due to the installation of the front stabilizer-to-fuselage attachment fitting P/N 17093-00, on additional aircraft to those covered by AD 57-13-09 and since special inspections are not required when the redesigned fitting P/N 17093-03 is installed, this supersedes the portions of AD 57-13-09 concerning this fitting and revision issued on Card No. 57-22.

Inspect visually for cracks, the front stabilizer fitting, P/N 17093-00 every 100 hours until replaced with the redesigned fitting P/N 17093-03. Fittings found cracked must be replaced.

(Piper Service Bulletin No. 160 dated October 7, 1957, covers the same subject.)

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
--- - _EMPTY_
Issuing Office
["AIR-720: Operational Safety Branch"]
FAA Documents