AD 55-07-02

Active

Landing Gear Tube Reinforcement

Key Information
55-07-02
Active
Not specified
December 04, 1956
Unknown
N/A
Applicability
["Aircraft"]
["Small Airplane"]
Piper Aircraft Inc.
PA-22
Regulatory Text

55-07-02 PIPER: Applies to All Model PA-22 Aircraft Except Serial Numbers 22-2377, 22-2379, 22-2385, 22-2388, 22-2389, 22-2391, 22-2394 and Up.

Compliance required by June 1, 1955.

Numerous instances have been reported of cracking in the leading edge of the streamlined tube of the landing gear at the point where the tube joins the inboard end of the axle. To prevent future failures, this joint should be reinforced by welding a steel strap reinforcement.

(Piper Service Letter No. 124 dated August 30, 1954, covers the same subject.)

AD Assistant

Get AI-powered answers about this AD, check applicability, and find compliance steps.

Sign Up to Unlock
References
This information is not available.
--- - Part 39
--- - _EMPTY_
Issuing Office
["AIR-720: Operational Safety Branch"]
FAA Documents