Background EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2021-0193, dated August 20, 2021 (EASA AD 2021-0193) to correct an unsafe condition for Airbus Helicopters (AH), formerly Eurocopter, Eurocopter France, and Aerospatiale, Model AS 355 E, AS 355 F, AS 355 F1, AS 355 F2, AS 355 N, and AS 355 NP helicopters, all serial numbers. EASA AD 2021-0193 requires accomplishment of the actions in the applicable Airworthiness Limitations Section (ALS) as defined in EASA AD 2021-0193. The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Airbus Helicopters Model AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters. The NPRM published in the Federal Register on June 30, 2022 (87 FR 39019). The NPRM was prompted by the identification of certain parts needing maintenance actions, including life limits and maintenance tasks. The NPRM proposed to require incorporating into maintenance records requirements (airworthiness limitations), as specified in EASA AD 2021-0193. Relationship Between This AD and Other Relevant Rulemaking EASA AD 2021-0193 states that it takes over the requirements for Model AS 355 helicopters from EASA AD 2010-0006, dated January 7, 2010 (EASA AD 2010-0006) (which prompted FAA AD 2011-22-05 R1, Amendment 39-17765 (79 FR 14169, March 13, 2014) (AD 2011-22-05 R1)) and EASA AD 2015-0094, dated May 29, 2015 (EASA AD 2015-0094) (which prompted FAA AD 2016-25-20, Amendment 39-18746 (81 FR 94954, December 27, 2016) (AD 2016-25-20)). EASA AD 2021-0193 also notes that the requirements of EASA AD 2010-0006 and EASA AD 2015-0094 have been incorporated into the applicable ALS specified in EASA AD 2021-0193. Accordingly, this final rule does not supersede AD 2011-22-05 R1 or AD 2016-25-20. Rather, the FAA has determined that a stand-alone AD is more appropriate to address the changes in EASA AD 2021-0193. Therefore, this AD requires incorporating into existing maintenance records requirements (airworthiness limitations), as specified in the applicable ALS, as defined in EASA AD 2021-0193. Accomplishment of the required actions terminates all of the requirements of AD 2011-22-05 R1 and AD 2016-25-20 for Model AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters only. Discussion of Final Airworthiness Directive Comments The FAA received no comments on the NPRM or on the determination of the costs. Conclusion These helicopters have been approved by EASA and are approved for operation in the United States. Pursuant to the FAA's bilateral agreement with the European Union, EASA has notified the FAA about the unsafe condition described in its AD. The FAA reviewed the relevant data and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on these helicopters. This AD is adopted as proposed in the NPRM. Related Service Information Under 1 CFR Part 51 EASA AD 2021-0193 requires certain actions and associated thresholds and intervals, including life limits and maintenance tasks. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. Other Related Service Information The FAA reviewed Airbus Helicopters AS 355 E Chapter 04 ALS Revision 010, dated September 14, 2020; Airbus Helicopters AS 355 F Chapter 04 ALS Revision 010, dated September 14, 2020; Airbus Helicopters AS 355 F1 Chapter 04 ALS Revision 010, dated September 14, 2020; Airbus Helicopters AS 355 F2 Chapter 04 ALS Revision 011, dated September 14, 2020; Airbus Helicopters AS 355 N Chapter 04 ALS, Revision 010, dated September 14, 2020; and Airbus Helicopters AS 355 NP Chapter 04 ALS Revision 009, dated February 4, 2019. This service information specifies procedures for mandatory actions for continued airworthiness. ADs Mandating Airworthiness Limitations The FAA has previously mandated airworthiness limitations by mandating each airworthiness limitation task ( e.g., inspections and replacements (life limits)) as an AD requirement or issuing ADs that require revising the ALS of the existing maintenance manual or instructions for continued airworthiness to incorporate new or revised inspections and life limits. This AD, however, requires operators to incorporate into maintenance records required by 14 CFR 91.417(a)(2) or 135.439(a)(2), as applicable for your helicopter, the requirements (airworthiness limitations) specified in a civil aviation authority AD. The FAA does not intend this as a substantive change. For these ADs, the ALS requirements for operators are the same but are complied with differently. Requiring the incorporation of the new ALS requirements into the existing maintenance records, rather than requiring individual ALS tasks ( e.g., repetitive inspections and replacements), requires operators to record AD compliance once after updating the maintenance records, rather than after every time the ALS task is completed. In addition, paragraph (h) of this AD allows operators to incorporate later approved revisions of the ALS document as specified in the Ref. Publications section of EASA AD 2021-0193 without the need for an alternative method of compliance (AMOC). Differences Between This AD and EASA AD 2021-0193 Paragraph (1) of EASA AD 2021-0193 requires compliance with actions and associated thresholds and intervals, including life limits and maintenance tasks, from the effective date of EASA AD 2021-0193. Paragraph (3) of EASA AD 2021-0193 requires incorporating the actions and associated thresholds and intervals, including life limits and maintenance tasks, into the approved maintenance program within 12 months after the effective date of EASA AD 2021-0193. This AD requires incorporating into existing maintenance records requirements (airworthiness limitations) within 30 days after the effective date of this AD. Costs of Compliance The FAA estimates that this AD affects 45 helicopters of U.S. Registry. Labor rates are estimated at $85 per work-hour. Based on these numbers, the FAA estimates the following costs to comply with this AD. Incorporating into existing maintenance records, requirements (airworthiness limitations) takes about 2 work-hours for an estimated cost of $170 per helicopter and $7,650 for the U.S. fleet. Authority for This Rulemaking Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify that this AD: (1) Is not a "significant regulatory action" under Executive Order 12866, (2) Will not affect intrastate aviation in Alaska, and (3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows: PART 39-AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive: 2022-19-13 Airbus Helicopters: Amendment 39-22182; Docket No. FAA-2022-0805; Project Identifier MCAI-2021-00951-R. (a) Effective Date This airworthiness directive (AD) is effective October 27, 2022. (b) Affected ADs This AD affects AD 2011-22-05 R1, Amendment 39-17765 (79 FR 14169, March 13, 2014) (AD 2011-22-05 R1); and AD 2016-25-20, Amendment 39-18746 (81 FR 94954, December 27, 2016) (AD 2016-25-20). (c) Applicability This AD applies to all Airbus Helicopters Model AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters, certificated in any category. (d) Subject Joint Aircraft Service Component (JASC) Code: 6410, Tail Rotor Blades. (e) Unsafe Condition This AD was prompted by the identification of certain parts needing maintenance actions, including life limits and maintenance tasks. The FAA is issuing this AD to address the failure of certain parts, which could result in the loss of control of the helicopter. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Required Action Within 30 days after the effective date of this AD, incorporate into maintenance records required by 14 CFR 91.417(a)(2) or 135.439(a)(2), as applicable for your rotorcraft, the requirements (airworthiness limitations) specified in paragraph (1) of European Union Aviation Safety Agency (EASA) AD 2021-0193, dated August 20, 2021 (EASA AD 2021-0193). (h) Provisions for Alternative Requirements (Airworthiness Limitations) After the actions required by paragraph (g) of this AD have been done, no alternative requirements (airworthiness limitations) are allowed unless they are approved as specified in the provisions of the "Ref. Publications" section of EASA AD 2021-0193. (i) Terminating Action for ADs 2011-22-05 R1 and 2016-25-20 (1) Accomplishing the actions required by this AD terminates all requirements of AD 2011-22-05 R1 for Model AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters only. (2) Accomplishing the actions required by this AD terminates all requirements of AD 2016-25-20 for Model AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters only. (j) Special Flight Permit Special flight permits in accordance with 14 CFR 21.197 and 21.199, are prohibited. (k) Alternative Methods of Compliance (AMOCs) (1) The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the International Validation Branch, send it to the attention of the person identified in paragraph (l) of this AD. Information may be emailed to: 9-AVS-AIR-730-AMOC@faa.gov. (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. (l) Related Information For more information about this AD, contact Kristi Bradley, Program Manager, COS Program Management Section, Operational Safety Branch, Compliance & Airworthiness Division, FAA, 10101 Hillwood Parkway, Fort Worth, TX 76177; telephone (817) 222-5110; email kristin.bradley@faa.gov. (m) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise. (i) European Union Aviation Safety Agency (EASA) AD 2021-0193, dated August 20, 2021. (ii) [Reserved] (3) For EASA AD 2021-0193, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet easa.europa.eu. You may find the EASA material on the EASA website at ad.easa.europa.eu. (4) You may view this service information at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call (817) 222-5110. This material may be found in the AD docket at regulations.gov by searching for and locating Docket No. FAA-2022-0805. (5) You may view this material that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fr.inspection@nara.gov, or go to: www.archives.gov/federal-register/cfr/ibr-locations.html. Issued on September 9, 2022. Christina Underwood, Acting Director, Compliance & Airworthiness Division, Aircraft Certification Service.