Examining the Docket
You may examine the airworthiness directive (AD) docket on the Internet at http://dms.dot.gov or in person at the Docket Management Facility office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The Docket Management Facility office (telephone (800) 647-5227) is located on the plaza level of the Nassif Building at the street address stated in the ADDRESSES section.
Discussion
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to include an AD that would apply to certain Airbus Model A300 B4-605R airplanes and Model A310-308, -324, and -325 airplanes. That NPRM was published in the Federal Register on October 12, 2006 (71 FR 60089). That NPRM proposed to require modifying the Bruce floor plan electrical emergency path marking system (FPEEPMS) and, for certain airplanes, modifying the automatic switching of the emergency lighting system.
Comments
We provided the public the opportunity to participate in the development of this AD. We have considered the comments received.
Request To Change Incorporation of Certain Information
The Modification and Replacement Parts Association (MARPA) states that, typically, airworthiness directives are based on service information originating with the type certificate holder or its suppliers. MARPA adds that manufacturer service documents are privately authored instruments generally having copyright protection against duplication and distribution. MARPA notes that when a service document is incorporated by reference into a public document, such as an airworthiness directive, it loses its private, protected status and becomes a public document. MARPA adds that if a service document is used as a mandatory element of compliance, it should not simply be referenced, but should be incorporated into the regulatory document; by definition, public laws must be public, which means they cannot rely upon private writings.
MARPA adds that incorporated by reference service documents should be made available to the public by publication in the Docket Management System (DMS), keyed to the action that incorporates them. MARPA notes that the stated purpose of the incorporation by reference method is brevity, to keep from expanding the Federal Register needlessly by publishing documents already in the hands of the affected individuals; traditionally, ``affected individuals" means aircraft owners and operators, who are generally provided service information by the manufacturer. MARPA adds that a new class of affected individuals has emerged, since the majority of aircraft maintenance is now performed by specialty shops instead of aircraft owners and operators. MARPA notes that this new class includes maintenance and repair organizations, component servicing and repair shops, parts purveyors and distributors, and organizations manufacturing or servicing alternatively certified parts under section 21.303 (``Replacement and modification parts") of the Federal Aviation Regulations (14 CFR 21.303). MARPA adds that the concept of brevity is now nearly archaic as documents exist more frequently in electronic format than on paper. Therefore, MARPA asks that the service documents deemed essential to the accomplishment of the NPRM be incorporated by reference into the regulatory instrument and published in the DMS.
We understand MARPA's comment concerning incorporation by reference. The Office of the Federal Register (OFR) requires that documents that are necessary to accomplish the requirements of the AD be incorporated by reference during the final rule phase of rulemaking. This final rule incorporates by reference the documents necessary for the accomplishment of the requirements mandated by this AD. Further, we point out that while documents that are incorporated by reference do become public information, they do not lose their copyright protection. For that reason, we advisethe public to contact the manufacturer to obtain copies of the referenced service information.
In regard to the commenter's request to post service bulletins on the Department of Transportation's DMS, we are currently in the process of reviewing issues surrounding the posting of service bulletins on the DMS as part of an AD docket. Once we have thoroughly examined all aspects of this issue and have made a final determination, we will consider whether our current practice needs to be revised. No change to the final rule is necessary in response to this comment.
Request To Add FAA Intent To Incorporate Certain Service Bulletins by Reference in the NPRM
MARPA requests that, during the NPRM stage of AD rulemaking, the FAA state its intent to incorporate by reference (IBR) any relevant service information. MARPA states that without such a statement in the NPRM, it is unclear whether the relevant service information will be incorporated by reference in the final rule.
TheFAA does not concur with the commenter's request. When we reference certain service information in a proposed AD, the public can assume we intend to IBR that service information, as required by the Office of the Federal Register. No change to this final rule is necessary in regard to the commenter's request.
Conclusion
We have carefully reviewed the available data, including the comments received, and determined that air safety and the public interest require adopting the AD as proposed.
Costs of Compliance
The following table provides the estimated costs for the U.S. operator to comply with this AD.
Estimated Costs
Action
Work hours
Average labor rate per hour
Parts
Cost per airplane
Number of U.S.-registered airplanes
Fleet cost
Modification of FPEEPMS
Between 44 and 47
$80
Between $2,570 and $2,690
Between $6,090 and $6,450
1
Between $6,090 and $6,450
Modification of automatic switching
14
$80
Between $534 and $727
Between $1,654 and $1,847
1
Between $1,654 and $1,847
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, Section 106, describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701, ``General requirements." Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
We have determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action" under Executive Order 12866;
(2) Is not a ``significant rule" under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and
(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
We prepared a regulatory evaluation of the estimated costs to comply with this AD and placed it in the AD docket. See the ADDRESSES section for a location to examine the regulatory evaluation.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
2. The Federal Aviation Administration (FAA) amends Sec. 39.13 by adding the following new airworthiness directive (AD):