Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2024-21-02, Amendment 39-22869 (89 FR 86721, October 31, 2024) (AD 2024-21-02). AD 2024-21-02 applied to Lycoming model engines that have certain connecting rod assemblies installed. AD 2024-21-02 was prompted by several reports of connecting rod failures, which resulted in uncontained engine failure and in-flight shutdowns. The NPRM was published in the Federal Register on August 7, 2025 (90 FR 38081). Since the FAA issued AD 2024-21-02, the ship date range for potentially affected parts that may be subject to connecting rod failure has been expanded, and additional parts that are eligible for installation have been identified. In addition, the manufacturer requested that credit be given to operators for the actions required in AD 2024-21-02 provided that the operators already accomplished AD 2017-16-11 and re-inspected any replacement connecting rod bushings received from Lycoming in accordance with the required actions of AD 2017-16-11. In the NPRM, the FAA proposed to require repetitive oil inspections for bronze metal particulates and, if found, additional inspections of the connecting rod bushings for damage ( e.g., deterioration, missing metal), proper fit, movement, and wear, and replacement if necessary. As terminating action to the connecting rod bushing inspections, the NPRM also proposed to require replacement of the connecting rod bushings with parts eligible for installation. The NPRM also proposed to expand the applicability by extending the shipping date range for affected parts. The FAA is issuing this AD to address the unsafe condition on these products. Discussion of Final Airworthiness Directive Comments The FAA received comments from one commenter, Lycoming. The following presents the comment received on the NPRM and the FAA's response to that comment. Request To Modify List of Known Engine Models With Affected Parts Installed Lycoming requested that the FAA modify the list of engines known to have an affected part installed in the proposed AD to include Lycoming Model IO-580 series, IO-720 series, and O-290 series engines. The FAA agrees with the commenter's request and has revised Note 1 to paragraph (c) of this AD to include Lycoming Model IO-580 series, IO-720 series, and O-290 series engines. Conclusion The FAA reviewed the relevant data, considered any comments received, and determined that air safety requires adopting the AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on these products. Except for minor editorial changes, and any other changes described previously, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator. Material Incorporated by Reference Under 1 CFR Part 51 The FAA reviewed Lycoming Mandatory Service Bulletin No. 630B, dated June 11, 2025, which specifies procedures for inspection of the connecting rod bushings for damage, proper fit, movement, and wear. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. Costs of Compliance The FAA estimates that this AD affects 45,152 engines installed on airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD: Estimated Costs Action Labor cost Parts cost Cost per product Cost on U.S. operators Inspect oil 2 work-hours × $85 per hour = $170 $65 $235 $10,610,720 Inspect connecting rod bushings 1 work-hour × $85 per hour = $85 0 85 3,837,920 Replace connecting rod bushings (per bushing) 4.5 work-hours × $85 per hour = $382 380 762 34,405,824 Authority for This Rulemaking Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the Agency's authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify that this AD: (1) Is not a "significant regulatory action" under Executive Order 12866, (2) Will not affect intrastate aviation in Alaska, and (3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows: PART 39-AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by: a. Removing Airworthiness Directive 2024-21-02, Amendment 39-22869 (89 FR 86721, October 31, 2024); and b. Adding the following new airworthiness directive: 2026-04-11 Lycoming Engines: Amendment 39-23271; Docket No. FAA-2025-1365; Project Identifier AD-2024-00684-E. (a) Effective Date This airworthiness directive (AD) is effective April 8, 2026. (b) Affected ADs This AD replaces AD 2024-21-02, Amendment 39-22869 (89 FR 86721, October 31, 2024); (AD 2024-21-02). (c) Applicability This AD applies to Lycoming Engines (Lycoming) model engines that have an affected part and part number (P/N) installed and are assembled within the ship date range, as specified in Table 1 to paragraph (c) of this AD. Table 1 to Paragraph ( c )-Affected P/Ns P/N Affected part Ship date range LW-13923 Connecting Rod Bushing 01/30/2009-09/09/2021 LW-11750 Connecting Rod Assembly 01/30/2009-09/09/2021 78030 Connecting Rod Assembly 01/30/2009-09/09/2021 LW-19332 Connecting Rod Assembly 01/30/2009-09/09/2021 LW-13865 Connecting Rod Assembly 01/30/2009-09/09/2021 77450 Connecting Rod Assembly 01/30/2009-09/09/2021 LW-13422 Connecting Rod Assembly 01/30/2009-09/09/2021 LW-13937 Connecting Rod Assembly 01/30/2009-09/09/2021 LW-15288 Connecting Rod Assembly 01/30/2009-09/09/2021 Note 1 to paragraph (c): The affected parts are known to be installed on Lycoming Model AEIO-320 series, AEIO-360 series, AEIO-390 series, AEIO-540 series, AEIO-580-B1A, AIO-320 series, AIO-360 series, HIO-360 series, HIO-390-A1A, HIO-540-A1A, HO-360 series, IO-320 series, IO-360 series, IO-390 series, IO-540 series, IO-580 series, IO-720 series, IVO-360-A1A, IVO-540-A1A, LHIO-360 series, LIO-320 series, LIO-360 series, LO-360 series, LTIO-540 series, LTO-360 series, O-233-A1, O-235 series, O-290 series, O-320 series, O-340 series, O-360 series, O-435 series, O-540 series, SO-580 series, TEO-540 series, TIGO-541 series, TIO-360 series, TIO-540 series, TIO-541 series, TIVO-540-A2A, TO-360 series, TVO-435 series, TVO-540-A1A, VO-360 series, VO-435 series, VO-540 series, and VSO-580-A1A engines. (d) Subject Joint Aircraft System Component (JASC) Code 8500, Engine (Reciprocating). (e) Unsafe Condition This AD was prompted by several reports of connecting rod failures resulting in uncontained engine failure and in-flight shutdowns (IFSDs). The FAA is issuing this AD to prevent connecting rod failure. The unsafe condition, if not addressed, could result in engine failure, an IFSD, and loss of control of the aircraft. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Required Actions (1) At the next oil change or within 4 months after the effective date of this AD, whichever occurs first, and thereafter at every oil change until the bushing replacement required by either paragraph (g)(3) or (4) of this AD is done, perform a visual inspection of the engine oil filter, oil pressure screen, and oil suction screen (depending on the engine configuration) for bronze metal particulates. The actions required by this paragraph may be performed by the owner/operator (pilot) holding at least a private pilot certificate and must be entered into the aircraft records showing compliance with this AD in accordance with 14 CFR 43.9(a) and 91.417(a)(2)(v). The record must be maintained as required by 14 CFR 91.417, 121.380, or 135.439. Note 2 to paragraph (g)(1): Guidance for engine oil filter, oil pressure screen, and oil suction screen inspection instructions and identification of metallic solids may be found in Lycoming Mandatory Service Bulletin No. (MSB) 480F, dated May 25, 2017 (Lycoming MSB 480F). (2) If, during any inspection required by paragraph (g)(1) of this AD, any bronze metal particulates are found and the source is identified as the connecting rod bushings, before further flight, inspect all affected connecting rod bushings for damage ( e.g. deterioration, missing metal), proper fit, movement, and wear in accordance with "Connecting Rod Bushing Inspection," of Lycoming MSB 630B, dated June 11, 2025. Note 3 to paragraph (g)(2): Guidance for identifying the source of metallic contamination may be found in Table 3 of Lycoming MSB 480F. (3) If the connecting rod bushings fail any inspection required by paragraph (g)(2) of this AD, before further flight, replace the connecting rod bushings with parts eligible for installation. This terminates the repetitive inspection required by paragraph (g)(1) of this AD. (4) At the next engine overhaul, replace the connecting rod bushings with parts eligible for installation. This terminates the repetitive inspection required by paragraph (g)(1) of this AD. (h) Definition For the purpose of this AD, a "part eligible for installation" is any connecting rod bushing having P/N 01K28983 or AEL13923, and any connecting rod assembly having P/N AEL11750, AEL78030, SL78030, SL77450, SL13937, SL19332, SL11750, and SL13422. (i) Credit for Previous Actions (1) You may take credit for the actions required by paragraph (g)(1) of this AD if you performed those actions before the effective date of this AD using Lycoming MSB 480F. (2) You may take credit for the actions required by paragraph (g)(2) of this AD if you performed those actions before the effective date of this AD using Lycoming MSB 630A, dated June 13, 2017. (3) You may take credit for the actions required by paragraph (g) of this AD if you accomplished AD 2017-16-11, Amendment 39-18988 (82 FR 37296, August 10, 2017) before the effective date of this AD. Credit is not given if you received replacement bushings from Lycoming as a result of accomplishing AD 2017-16-11 and you did not perform the connecting rod bushing press-out verification procedure on the replacement bushings in accordance with Lycoming Engines Mandatory Service Bulletin No. 632B, dated August 4, 2017. (4) You may take credit for the actions required by paragraph (g) of this AD if you accomplished AD 2024-21-02, Amendment 39-22869 (89 FR 86721, October 31, 2024) before the effective date of this AD. (j) Alternative Methods of Compliance (AMOCs) (1) The Manager, East Certification Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the East Certification Branch, send it to the attention of the person identified in paragraph (k)(1) of this AD and email to: AMOC@faa.gov. (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. (k) Additional Information (1) For more information about this AD, contact David Bergeron, Aviation Safety Engineer, FAA, 1701 Columbia Avenue, College Park, GA 30337; phone: (516) 228-7321; email: david.j.bergeron@faa.gov. (2) Material identified in this AD that is not incorporated by reference is available at the address specified in paragraph (l)(3) of this AD. (l) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the material listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this material as applicable to do the actions required by this AD, unless the AD specifies otherwise. (i) Lycoming Mandatory Service Bulletin No. 630B, dated June 11, 2025. (ii) [Reserved] (3) For Lycoming material identified in this AD, contact Lycoming Engines, 652 Oliver Street, Williamsport, PA 17701; phone: (800) 258-3279; website: lycoming.com/contact/knowledge-base/publications. (4) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call (817) 222-5110. (5) You may view this material at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email fr.inspection@nara.gov . Issued on February 18, 2026. Paul R. Bernado, Acting Director, Compliance & Airworthiness Division, Aircraft Certification Service.